| MODEL | GP33-10-20KS | GP33-30-40KS | GP33-60-80KS | GP33-100-120KS | GP33-160-200KS | GP33-250-300KS |
| Capacity | 10/15/20Kva | 30/40Kva | 60/80Kva | 100/120Kva | 160/200Kva | 250/300Kva |
| UPS(L*W*D) | 402x660x880 | 412x813x1121 | 505x1060x1321 | 555x1060x1421 | 1043x1160x1748 | 1600x1182x1962 |
| Pack (L*W*D) | 505x800x1030 | 515x926x1270 | 603x1190x1486 | 653x1190x1586 | 1303x1180x2076 | 1760x1301x2168 |
| UPS weight (kg) | 153/168/194 | 223/256 | 382/434 | 535/580 | 1120/1320 | 1540/1745 |
| Temperature | 0℃~40℃ |
| Humidity | 0~95% non condensate |
| Noise | <60dB @1.5m from surface of unit |
| Altitude | 1000m(height rises every 100m, power decreases 1%, maximum height is 4000m) |
| Efficiency | Power saving mode>98%, Inverter>92%, AC-AC＞91% |
| Transference | 0ms cutless |
| Technology | True double-conversion online technology conversion performed by IGBT |
| Input |
| Voltage | 3*220/380 vac ± 25% |
| Frequency | 50Hz ± 15% |
| Conductors | Three Phases + N + E |
| Output |
| Voltage (selectable) | 3*220/380 vac ± 1% |
| Frequency | 50Hz ± 0.1% |
| Waveform | Pure sine wave generated by high frequency PWM inverter |
| Harmonic Distortion | <2% Linear Load / <5% Nonlinear Load |
| Crest Factor | 3:1 |
| Power Factor | 0.8 or 0.9 |
| Overload Recuperation | Automatic transfer to normal |
| Voltage Regulation | Load balance: ± 1% |
| Overload Capacity | 125% for 12 minutes/ 150% for 1 minute |
| Conductors | Three Phases + N + E |
| Battery |
| Type | Maintenance-free sealed lead-acid battery, 12V*32 batteries |
| Full load autonomy | 3 to 15 minutes, extended-range capacity |
| Typical recharge time | 4~8 hours, 90% |
| Battery behavior | Autotest, Transfer Point Adjustable battery and alarm setting |
| Battery protection | Fuse protection, battery switch, temperature compensation, regular inspection, software protection, overvoltage tripping. |
| Rectification | Software protection, input switch, over current protection, temperature protection. |
| Protection |
| Hardware protections | Breaker for input, output, battery and bypass. Fast acting fuses in DC, fans, redundant power supplies, temperature sensors, on-o switch and audible alarms. |
| Bypass | Static solid state, automatic and manual operation without interruption for maintenance. External Bypass(optional) |
| Emergency switch | Remote and/or local EPO |
| Supervisory control and communication |
| Frontal panel | Interactive LCD display(Touchscreen) |
| Alarms | Audible and visual alarm for abnormal conditions |
| Communications | RS232, SNMP-RJ45, GPRS (RS232 & RJ45 standard, the other is optional) |
